safety construction helmet EN102012

1)UV-resistant high density polypropylene safety helmet 2)Polyethylene starry lining 3)European standard 4)Manual adjustment

 Name:SAFETY HELMET MANUAL ADJUSTMENT

Size:Adjustable

Colour:Blue - White - Yellow

Description :UV-resistant high density polypropylene safety helmet. Polyethylene starry lining. Sweat band. Manual adjustment headmeasurement.

Materials:Polypropylene (PP)Weight : 334 g

Instructions for use:The helmet is made so that the energy released after a shock is absorbed by partial destruction or damage of the cap andharness, even if such damage is not immediately noticed, it is recommended to replace any helmet having being subject to astrong shock.In order to ensure enough protection, this helmet should be adapted or adjusted to the user's head size. We should draw theusers' attention also on the eventual hazard of modifying or removing one of the original parts of the protective helmet, exceptfor the modification and removal type recommended by the helmet manufacturer. Helmets should not be adapted in any casefor setting accessories according to a procedure not recommended by the helmet manufacturer. Do not apply paints,solvents, adhesives or stickers on it, except for those recommended by the instructions of the helmet manufacturer. In orderto ensure effective protection, this helmet should be worn with its peak forward (sit in straight position) and it should beadjusted to the user's head size (not fit to loose or to squeeze) to by its adjustment system headband press located at therear of the helmet (size 53-63 cm).

Limits to use:Do not use this helmet out of its usage specifications defined in the instructions above. The helmet life is affected by severalfactors, such as cold, heat, chemical products, sun light or misuse. A daily check should be performed in order to identify anysign of rendering (cracks, flaws) the helmet, its harness and accessories fragile. Any helmet having been subject to a strongshock or having wear signs should be replaced. If it has no defaults, it is therefore proper for the intended use. Themanufacturing date is marked inside each helmet. Under normal usage conditions, this protective helmet should provideproper protection for 2 up to 3 years after the first usage, or 5 years according to the manufacturing date. This helmet doesnot include any substance known to be susceptible of causing allergies. However if a sensitive person has an allergicreaction, it should therefore leave the hazardous area, remove the helmet and ask for medical advice.

Instructions for storage:When it is not used anymore or during transportation, the helmet should be stored in a dry cool place away from light, frostand in a location granting that no chemical product or sharp object bends it by falling above.Instructions for cleaning / maintenance:This protective helmet may be cleaned and disinfected by means of a cloth impregnated in a low concentration cleaningsolution. One shall not use any abrasive or corrosive chemical product. If this helmet cannot be cleaned by using this method,it should be replaced.Performances :

.

safety construction helmet EN102012