- Safety Goggles[10]
- Ear Protector[7]
- Other Safety Products[10]
- Face Shield[2]
- Medical Consumables[2]
- Chemical Respirator[3]
- Safety Helmet[7]
- Safety Gloves[8]
- Rain Boots[3]
- Safety Shoes[2]
- Workwear[3]
- Reflective Safety Clothing[2]
- Safety Clothing[3]
- Safety Belt & Accessories[9]
- Other Special Purpose Bags & Cases[1]
- Suspension System[1]
- Maternity Clothing[1]
- Contact Person : Mr. Sun Weiming
- Company Name : Beijing Huashisheng Sciences & Trade Co., Ltd.
- Tel : 86-010-58207640
- Fax : 86-010-58207641
- Address : Beijing,Beijing,Room 1803 , Building 1, No. 93, Jianguo Road, Chaoyang District
- Country/Region : China
- Zip : 100022
fall arrest harness EN 501055
Name:FULL BODY HARNESS / 2 ATTACHMENT POINTS
Size:Adjustable
Colour:Red
Description :Full body harness with back and chest attachments, made of 45-mm wide red polyester straps, and two corrosion-resistant parachute buckles at the thigh level for opening and easy adjustment of the harness.
Materials:Straps: polyester.
Instructions for use:This harness is recommended for all types of height interventions (frames, roofs, glass roofs, scaffoldings, travelling cranes,cranes), for simple works, of short period or occasional. A harness must be strapped to the body as tight as possible but not excessively to allow total freedom of movements to the user. Chest anchorage points must be used two by two to keep longitudinal stresses if a fall occurs, and to avoid lateral assymetrical stresses as far as possible.
Limits to use:Do not use this harness out of its usage specifications defined in the instructions above. Replace the harness if its protective quality becomes doubtful. After a fall, return the harness for inspection to the manufacturer or one of his qualified representatives. Schedule harness control every 12 months, either by the manufacturer or by a qualified representative. A full body harness and a lanyard do not constitute a fall arrest system.
Instructions for storage:The harness must be hung up in a temperate,.dry and ventilated room away from sun rays and rodents.
Instructions for cleaning / maintenance:Brush with water and soap. The harness will be then wiped with a dry cloth and hung up in a ventilated room. Coat metallic parts with vaseline oil soaked cloth. Bleaching agents and detergents are strictly forbidden.The equipment must always be inspected before use. Check especially:- Straps : no start of cutting, of burning, of rusting, of abnormal narrowing.- Sewing : no visible damage - Metallic elements : no distortion or oxidation.To make sure that the karabiners work correctly.
Performances :This harness complies with the European directive 89/686, notably regarding design, manufacture and test methods, and with EN361 standard.
fall arrest harness EN 501055
